This week target

1-Read Upper Berth story
2-colect some image
3- research related to the story

Character Design (Final)

DR.RLS

Dr.RLS  is a rap nickname for an animated rap Lizard singer. He is 16 years old and so impressed withhip hop music and hip hoplifestyle. Moreover, he is a big fan of famous rap singers such as Eminem

Dr.RLS always spend almost his free time with friends in his own small studio, which it is made in a small room having computer with recording software and some recording equipment to compose some beat and lyrics for rap songs

As he has established with his two best friends a hip hop band, doing some local concerts for their friends showing that they are on their way to achieve their dreams to become a famous hip hop band.

Dr.RLS band like to wear hip hop fashion which contains starter jackets male, athletic jerseys classic tall tee visors and big trousers

 

 

 

 

 

 

Character Design story board

 

 

My final 3d model after I rigged it is able to do some movement but it need more work

human walk cycle after in basic human shape

project evaluation

Character design project was a good chance to learn new techniques such as how

-First we learnt how to create 3 view projection character which uses to be reference to build 3d model of it .

-Second I learnt how to build 3d character using cinema 4d program .

-final I learnt how to rig character to make the 3d model apple to be animated   

I think I did well in this project but haven’t be able the limit time I haven’t been able to finish my character shape and rig which I am going to do later on

   

Human Walk Cycle In Cienam 4D

Human walk cycle in cinema 4d

to do that I have done a very simple shape for human by using capsule shapes to make legs hands arms head then I used joint to do rigging it
and then I started animate the walk cycle by using time line and key framing

 

next week target
1-do my story board to character design
2-finsh my essay
3-finsh my contextual studies

Chatracter Rigging In Cinema 4d

First I had to create  a skeleton ,so to do that I  used joint tool from the characte menu  and then I inserted a joint at the pelvis and then  another  inisde the head by holding Ctrl,then I split the tow joints up by holding shift and then  clicking the connection between the  joints .I have placed one of the splits in between the shoulders ,and then tow up and under the stomach .these joints is  going to be the spine and the top joint for the head and the second top  going to be for the neck .

I used the same (Joint )technique to make arms and legs joints, so I have made joints for the shoulder , arms and hands .then I  have made joints for the legs, heels foot and toes .

Spine and Head Control

To control the movement of head joint I had to make controller by adding spine and then I made it editable after then I moved itover the head of the character, I put the head controller inside the head joint in the( object manger),Then I selected the orange arrows on the left of the cinema 4d screen and then I set all coordinates to 0, I took the head control out of the head joint then I set the rotation coordinates to 0,I added constraint to the head joint in the constraint attribute manager I clicked PSR then I dragged the head controller into the target box and then clicked(R).Now the head controller is ready to control the head joint  .I repeated this procedure to make controllers to next to 2 joints of the spine.

 

 

 Shoulder, Arm and Hand
I have done a smellier way of head and spine control to the hand and shoulder control but I had to add IK command form character tag to the shoulder joint and in IK tag in attributes manager, I dragged the hand joint into the end box and the hand controller into the goal box and I added pole, then I moved the pole to get good result when I animating the pole after that I added constraint to the hand joint I chose parent and, Then I dragged  hand controller into the target field and checked  the rotation box .

 

Legs

Before I started rigging the legs I had to make three nulls for the heel toe and foot it had to positioned in their joints And the I repositioned heel null to the bottom and back of the foot .

Then I made foot control under the foot joints then at object manager I placed foot and toe null to heel null ,And then  I placed heel null to the foot control ,then I added constraint to heel joint and checked up and aim box on the aim tab set the axis to z+ and the dragged foot null to target field on up vector I set the axis to y- and z= and then dragged heel null in the target  field ,I added another constraint to the foot joint with same sitting apart from in target field on aim tab changed the foot null to toe null ,I had to add IK tag to the joint as I dragged the heel joint into the end field the added goal and pole ,I moved the pole outwards to the knee in object manager I place the goal into the foot null

 

Feet
Firstly I selected foot control and in the attributes manger clicked user data and I add user data named the data foot roll I set the interface to float slider and the unit to degree and min value to -15 and the max value to 30 ,Then I add Xpresso tag I dragged the foot controller heel null and foot null to xpresso window ,I clicked the red corner on the foot controller box and select user data foot roll
I clicked the blue coroner on the foot null and heel null box's and selected  rotation ,then I inserted tow range mappers by right in first range mapper in the attributes window set input range and output range to degree, and then I clicked the clamp lower box and set input lower and output lower to 0
as well input upper and output upper to 30,then on the second range mapper the input range and output range to degree.
on clamp upper box
se input lower and output lower to 15
Input upper and output upper to 0
Finally I have to connected the foot controller re circle to both range mapper blue circles
and connected the first to heel null and foot null

 

After I mirrored  the hand and the legs joints my character is ready to be animated and it can do some simple movement.

 

 

 

 

I had to use weight technique to give to the  character more realistic movement.

 

 

Finally the character is ready to do simple movement .

 

this week target
1. work on character walk cycle
2.finish my Essay.
3. development write up my contextual studies .

 

Charterer Design (3DModeling in Cenima 4d )

After I have finished the 2d side and front view projection for my character which is going to be used as a reference to build its 3d shape in cinema 4d program .To do it I followed teacher instruction and a hand book has giving to me from him. These reference photos which I made needed to be positioned correctly in the respective views and the arms and legs should be spread so the joints can be added more easily ,to load this reference image into viewport as a background I selected configure command form the viewports (edit menu )and then I clicked on the back tabs image selection path button to select the reference image.

Build the Body Shape
To start the 3d shape I have decided to start from character's shoes ,so I created cube shape and then I made it editable and scaled it to fit the reference image, next I added a some points by using knife tool in loop mode to add few subdivisions.  and I moved the added points accordingly to match the shape of the character shoes in the 3 side views .

next I selected the polygons on the top of the shoes and then I use the extrude inner tool to create the first piece of the legs and then I used( extrude) tool to create the rest of the leg and then moved the points to match the shape of the legs .then I repeated this steps to build the rest of the body and the arm.

Head shape
To build the head shape, I used plan shape and started from the middle of the eyes ,and then is start extrude it, following the head reference in two viewports .

After I have complete one  half of the body I   mirrored it  using by symmetry object to create the other side to make these tow shapes as one object ,I chose connect objects command to connect  them ,then I clicked M and Q on computer keyboard to active (wled) tool ,which is going to help me to make each tow points of both side as a one point that which is going to  close the hall in between these two side of the body .

 

 

Now the 3d model  of my character is read to be rigged .

 

 

 

Targets for this week, to be completed for next Monday :-

1.Finish 3D model

2.Start to rig out the character.
3.Finish writing up research for Essay.
4.Do some writing up of develop my research

Charterer Design (2D projection reference )

Charterer Design
In this Module we have been ask to build character to be animated in cinema 4d
my character is a rap singer to build this character I did search about hip hop fashion and lifestyle which contains big trouser that make the person who is warring them looks like has a short legs which remind me by the shape of lizard for That my charterer is lizard rap singer

To build a 2d projection reference for my model to use it later to build a 3d model of my character ,

I used Photoshop to draw fast sketching by using brush tool and layering technique . 

 

To give  more quality to my 2d model  I used adobe illustrator to line out  the 3 projection view of my character so used to do it pen tool and layering technique

finally  the 2D 3 projection  views model  is ready to be use as refrence to build the 3Dmodel .

next week target

1-start work on 3d model

2-work on essay

3-work on contextual studies

Fons Schiedon

 Fons Schiedon (1980, The Netherlands) is a New York based director, designer and artist.
Graduated at the School of Visual Arts Utrecht in 2002, a trained illustrator and self-taught animator, he has directed a wide range of productions, including music videos, commercials and short films. Most of his work involves animation and digital post-production. His experience as a designer and art-director inform his directing work with a strong sense of visual storytelling I loved his creative  character and how mix 2d and 3d
in his short movies